DRPD0=0, FIXPHY0=0, RPUE0=0, SRPC0=0
Deep Software Standby USB Transceiver Control/Pin Monitor Register
| SRPC0 | USB Single End Receiver Control 0 (0): Input through the DP and DM inputs is disabled. 1 (1): Input through the DP and DM inputs is enabled. |
| RPUE0 | DP Pull-Up Resistor Control 0 (0): Disables DP pull-up resistor. 1 (1): Enables DP pull-up resistor. |
| DRPD0 | D+/D- Pull-Down Resistor Control 0 (0): Disables DP/DM pull-down resistor. 1 (1): Enables DP/DM pull-down resistor. |
| FIXPHY0 | USB Transceiver Output Fix 0 (0): The outputs are fixed in normal mode and on return from deep software standby mode. 1 (1): The outputs are fixed on transitions to deep software standby mode. |
| DP0 | USB0 D+ InputIndicates the D+ input signal of the USB. |
| DM0 | USB D-InputIndicates the D- input signal of the USB. |
| DOVCA0 | USB OVRCURA InputIndicates the OVRCURA input signal of the USB. |
| DOVCB0 | USB OVRCURB InputIndicates the OVRCURB input signal of the USB. |
| DVBSTS0 | USB VBUS InputIndicates the VBUS input signal of the USB. |